1. The approval is limited to that specified in the enclosed Terms of Approval, and
2. This approval requires compliance with the procedures specified in the Design Organisation Handbook, reference BAM Design Organisation Handbook, in the latest revision, and
3. This approval is valid whilst the approved Design Organisation remains in compliance with Part21., Section A, Subpart J.
4. Subject to compliance with the foregoing conditions, this approval shall remain valid until surrendered or revoked.

Terms of Approval

Design Organisation Approval Certificate

EASA.21J.339

1. Scope of work
   
   The holder of the Design Organisation Approval is entitled to design in accordance with the applicable type-certification basis, operational suitability data certification basis and environmental protection
   requirements as defined in Annex A.
   
   
2. Privileges
   
   
   1. The holder of this design organisation approval shall be entitled to perform design activities under
      Part 21 and within its scope of approval.
      
      
   2. Subject to 21.A.257(b), the Agency shall accept without further verification compliance documents submitted by the holder of this design organisation approval for the purpose of obtaining, as per 21.A.263(b):
      1. [Not applicable]
      2. [Not applicable]
      3. a supplemental type-certificate
      4. [Not applicable]
      5. [Not applicable]
         
         
   3. The holder of this design organisation approval shall be entitled, within its terms of approval and under the relevant procedures of the design assurance system, as per 21.A.263(c):
      1. to classify changes to type-certificate and repairs as "major" or "minor"
      2. to approve minor changes to type-certificate and minor repairs
      3. to issue information or instructions containing the following statement: "The technical content of this document is approved under the authority of DOA ref. E4S4.21J.339"
      4. to approve minor revisions to the aircraft flight manual and supplements, and issue such
         revisions containing the following statement: "Revision No [YY] to AFM (or supplement) ref. [ZZ] is approved under the authority of DOA ref. E4S4.21J.339."
      5. [Not applicable]
      6. [Not applicable]
      7. [Not applicable]
         
         
3. Obligations
   
   The holder of the Design Organisation Approval shall, as per 21..4.265:
   
   1. maintain the handbook in conformity with the design assurance system;
   2. ensure that this handbook is used as a basic working document within the organization;
   3. determine that the design of products, or changes or repairs thereof, as applicable, comply with
      applicable requirements and have no unsafe feature;
   4. except for minor changes or repairs approved under the privilege of paragraph 2(c), provide to the Agency statements and associated documentation confirming compliance with paragraph 3(c);
   5. provide to the Agency information or instructions related to required actions under Part 21 point 27.4.3B;
   6. [Not applicable];
   7. [Not applicable];

Date of issue: 22/06/2018

lain HIGGINS Senior DOA Team Leader

Annex A

Scope of work

List of products

[Not applicable]

Limitations

Limitations common to all products and activities

1. Changes and repairs impacting products' noise and emissions characteristics are excluded.
2. The technical field of Fuel Systems is limited to auxiliary fuel systems.
3. Development of Operational Suitability Data excludes the OSD constituents CCD, FCD, MCSD and SIMD.